PL-PRO D Series II Power Conditioner:

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PL-PRO D Series II power conditioner, featuring Furman's revolutionary SMP technology. Furman's Series Mode Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT). Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressor. The PL-PRO D Series II features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, all units include a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation. A front panel mounted master power switch is protected by a hinged cover, preventing accidental disconnection of AC power to the unit’s outlets. The front-panel circuit breaker - power switch can be quickly and easily reset should the unit be overloaded. Furman's Series II Pro units also feature a 10 foot, 12 gauge heavy-duty power cable.


Features:

- SMP with extreme voltage shutdown
- LiFT (Linear Filtering Technology) with zero ground contamination
- Two retractable, long-life, low-heat LED light fixtures with dimmer
switch for rack illumination (On PL units only)
- BNC connector on the rear panel allows you to attach any standard
goose neck lamp to illuminate the rear of your rack
- Front panel digital meter displays incoming AC line voltage with
laboratory accuracy (+/- 1.5 VAC)
- Eight rear panel outlets and one front panel outlet
- 20 amp rating, with ultra-high inrush capable magnetic circuit breaker
- Three year limited warranty


Specifications:

Current rating:	20 amps ("E" versions 16 amps)
Operating Voltage:	90 to 140 VAC (“E” versions 180 to 280 VAC)
Over Voltage Shutdown:	140 VAC typically (“E” versions 280 VAC typically)
Voltmeter Accuracy:	PL-PRO D II & PM-PRO II: +/-1.5 VAC
Spike Protection Modes:	Line to neutral, zero ground leakage
Spike Clamping Voltage	188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time:	1 nanosecond
Maximum surge current:	6,500 amps
Noise attenuation:	10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz Linear attenuation curve from 0.05 - 100 Ohms line impedance
Mechanical: Dimensions:	Dimensions: 1.75” H x 19” W x 10.5” D. Weight: 11 lbs (5 kg). Construction: Steel chassis, .125” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption:	12 watts
Safety Agency Listings:	CE, NRTL-C
Patent number:	CA 1332074 (4,901,183)