Furman PL-PLUS D Series II Power Conditioner

The most widely recognized and trusted name in AC power conditioning, is proud to introduce the PL-Plus D Series II Power conditioner, featuring Furman's revolutionary SMP technology. Furman's Series Mode Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT). Together; these technologies comprise, what is without question, the worlds most advanced and comprehensive transient voltage surge suppressor. The PL-Plus D Series II features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, all units include a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation. A front panel mounted master switch controls operation of the rear outlets, and glows red when the power is on. The front-panel circuit breaker can be quickly and easily reset should the unit be overloaded. The PL-PLUS D Series II also features a 10 foot, 14 gauge heavy-duty power cable.

PL-PLUS D Series Features:

All PL-8 Series II features, plus Front panel digital LED meter displays incoming AC line voltage with laboratory accuracy (+/- 1.5 VAC)


Specifications:

Current rating:	15 amps ("E" versions 10 amps)
Operating Voltage:	90 to 140 VAC (“E” versions 180 to 280 VAC)
Over Voltage Shutdown:	140 VAC typically (“E” versions 280 VAC typically)
Voltmeter Accuracy:	PL-PLUS II only: +/-2 VAC, calibrated with internal trimpot adjustments
Spike Protection Modes:	Line to neutral, zero ground leakage
Spike Clamping Voltage	188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time:	1 nanosecond
Maximum surge current:	6,500 amps
Noise attenuation:	10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz Linear attenuation curve from 0.05 - 100 Ohms line impedance
Mechanical: Dimensions:	Dimensions: 1.75” H x 19” W x 10.5” D. Weight: 11 lbs (5 kg). Construction: Steel chassis, .125” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption:	12 watts
Safety Agency Listings:	CE, NRTL-C